Preform Mould for candy jar
Product description

Mould Base Standard :

LKM Brand, Hasco, DME ect ;

XUEJUN customed or As customers'Requirement

Cavity/Core Material :

S136, 2316,S316,ect ;

XUEJUN customed or As customers'Requirement

Cavity Qty :

Multi-cavity(1-144cavity) ;

Runner :

Yudo/ Mastip/ HASCO/ DME/Or other hot runner As customers'Requirement

Gate :

pnuematic pin-point valve gate OR short tail OR long tail

cooling system:

spiral independent cooling system for each single core ,cavity and valve gate.

Plastic Material for product:


Mould Life Time :

more than 2,000,000shots as per customers' requirement ;

Lead Time :

25-45 workdays based on the different products ;

Package :

Standard wooden case package or As per customers' requirement ;

Price Terms :


Payment term:

T/T, L/C at sight;

1.Mould structure
    Advanced structure is designed to improve rate of finished products;The each cavity is self locked independently with the core.The off-center adjustment system make the perform thickness error less than0.05mm.Bottleneck is adopted International Screw thread standard, No cutting of gate to reduce the labor intensity

2. Material of steel
    Cavity and core use stainless steel 2316 with fine polishing,high hardness to get mold's high precision and good quality. mechanical treatment cavity and core to prolong service life,nitrogen treatment with neck screw.with fitly operation,guarantee Long using life over 2 million shots of injection cycle

3.About gate system
    Pin-valve gate,pneumatic drive the nozzle pin simultaneous high speed open and close action. which can effectively control the injection hole open and close actions on each cavity. reliable seal function, smooth moving, low thermal expansion rate ,long using life and also saves electric energy.

4.About hot runner 
    The hot runner system is designed and made by ourselves, it can achieve ideal and prompt heating effect for preform production ,cavity with lower injection pressure to reduce wear and tear of mould parts.we use the double heating system,it has separate temperature control mode ,the heat bar are used to heat the mould mainfold plate,small heaters supply the heating temperature for cavity nozzle continuously.

5.Cooling system 
    Each parts including core ,cavity and valve gate has independently cooling system.

6.special satisfied servive
    Each mould undergoes strict mould test before delivery.we can provide an experienced team for installation and test as per client's request Standard inter-changeable mould components

    High quality mould from good mould manufacture,we can design different  preform&bottle mould according to customer require.

Contact Us

 TaiZhou HuangYan XueJun Mould Co.,Ltd

NO.10 Meihuajin Road, HuangYan, TaiZhou, ZheJiang, China